macOS doesn't expose the monitor-mode / packet-injection path that WFB systems normally rely on. I really didn't like the idea of needing a separate linux box just to talk WFB to other edge devices, like drones. This talks to the ALFA AWUS036ACH as a USB peripheral directly, initializes the RTL8812AU, submits raw 802.11 WFB frames over bulk OUT, receives frames over bulk IN, and bridges them to WFB-NG’s distributor/aggregator UDP protocols.

Basically, this is what's working (you can see more detail in the readme):

- native macOS userspace RTL8812AU bring-up

- TX/RX of WFB datagrams

- production-ish service runtime

- macOS utun bridge helper (if you need an IP-based link)

- RF diagnostics, telemetry, LED heartbeat, TDD airtime controls

There's a GitHub alpha release with arm64 macOS binaries

This is definitely still alpha. The direct-radio path is currently macOS-focused and tested with ALFA AWUS036ACH adapters on both sides (the other side is a Raspberry Pi 5 running Bookworm). macOS 26 works through IOUSBHost as libusb is not reliable there. Linux should still use native WFB-NG + rtl88xxau monitor mode rather than this USB bridge. Long-range RF quality and calibration work are ongoing. So far, some short range profiles are showing pretty good results.

I’m sharing early because getting WFB-like radio links working from a Mac seemed unlikely when I started, and the path turned out to be more interesting than expected.

My goal is for this to be cross-platform as-needed. Next up is an attempt at Android support via USB-OTG. We'll see how that goes.