Longer story: Chyros suggested about 5 months ago that I make an "ultra bright" RGB LED keyboard that used my 3D printable Void Switch design (https://github.com/riskable/void_switch) so he could do a fun "RGB" video. I designed the PCB, the case, the top plate, switches, stabilizers, rotary encoders, etc from scratch and the keyboard in the video is the result.

The keyboard hardware was actually done within the first 3 months but I needed some extra time to add lighting effects to the firmware to meet the "fancy RGB" requirement :)

It's actually my 2nd normal-size analog keyboard design. The first being my Riskeyboard 70 which used a MAX7219 LED matrix display and regular (non-XL) ws2812b RGB LEDs: https://gfycat.com/firsthanduniformeasteuropeanshepherd

Not shown in his video: The top plates have no electronics in them which means they're completely waterproof and can be washed in a sink with soap & water: https://gfycat.com/unconsciousvigilantkinglet . Also, the incremental rotary encoder and absolute rotary encoder (aka "the selection knob") are analog as well (using a custom design).

The keycaps were 3D printed as well and designed using my Keycap Playground: https://github.com/riskable/keycap_playground (I wrote a Python script to generate a full set; a similar script can be found in the `scripts` directory of the repo)

Basically, other than the PCB & magnets (+hardware) the entire keyboard was 3D printed. I'd be happy to answer folks questions about it.